The View Camera Spirit Level kit is designed as a replacement or for the addition of a precision level to a wooden field camera.    Precise leveling of the back of the view camera (both left to right and front to back) is a must for making images with correct perspective.    If you own an older camera with the swinging pointer-type mechanism, or if you have a broken level, you need a suitable, accurate replacement.    For two axis leveling on camera backs without levels, you will need two kits, one for side to side and one for front to rear.


This kit contains a precision spirit level vial, beautiful custom machined, hand lacquered, brushed brass cover plate and miniature round head brass screws.    In the typical installation, the level vial is protected in a clean, attractive, easy to use, as well as functional manner.


This is the same precision spirit level vial used by the major manufacturers of modern wooden view cameras.    The fluid is Yellow Methanol with a bubble size of 0.220" to 0.240" with two 0.010" wide reference marks.

PRECISION SPIRIT LEVEL VIAL SPECIFICATIONS

LENGTH = 0.610"
DIAMETER = 0.236"
NOMINAL SENSITIVITY = 50 min. (0.100" +/- 5')

COVER PLATE DIMENSIONS

KIT CONTAINS THE FOLLOWING:
1ea.   Precision Spirit Level Vial
1ea.   Lacquered, Brushed Brass Cover Plate
2ea.   #1 x 1/4" Brass Wood Screws

PLEASE NOTE:  Installation requires additional tools and a good knowledge of basic wood working technique.   .   .   For a new installation, you will be required to route an appropriate opening to accommodate the level vial and drill holes for the screws.   .   .   you will also need clear silicone glue to hold the level vial in place.   .   .   you must also have an accurate reference level to adjust the accuracy of the new installation.   .   .

Precision level vials are available separately for $4.00 each, plus $4.30 shipping.   

Click HERE for recommendations on installing your level kit.

For an ADOBE pdf brochure, click HERE.